Features of LiFePO4 battery pack 48V 100Ah, telecommunication battery:
- Replacement lead-acid battery ( AGM battery / deep cycle battery / gel battery )
- RV, Solar Energy Storage ect.
- High energy density
- About 1/3 the weight of lead-acid batteries.
- Environment friendly, no toxic
- No memory effect, 2000 times cycle-life
- Safe and reliable, no explosion when piercing, no fire when over voltage
- Low self discharge
- High power, maximize discharge current up to 5C
Standard Test Condition of RS485 communication battery pack 4800Wh
Test should be conducted with new batteries within one month after shipment from our factory and the cells shall not be cycled more than five times before the test. Unless otherwise defined, test and measurement shall be done under temperature of 23±2℃ and relative humidity of less 75%.,air 86Kpa~106Kpa.
Specification of LiFePO4 battery pack 48V 100Ah, telecommunication battery (@Battery initial Temp25±5℃)
||LiFePO4 battery pack 48V 100Ah, telecommunication battery
||prismatic 3.2V 100Ah LiFePO4 battery cell
||End of Charge Voltage
||Over-Charge Voltage Protection cell
||Max continuous charge current
||Maximum Continuous Discharging Current
||Over-discharge Voltage Protection cell
||Over-Current Discharge Protection
||Operation Temperature Range
||Charge 0~60 C, Discharge -20~60 C
||Storage Temperature & Humidity Range
||Less than 1 month:-20℃～45℃,45%RH～75％RH
|Less than 3 months:-10℃～35℃,45%RH～75％RH
Recommended storage environment:
Long time storage:
If the battery need be stored for a long time, the voltage should be at 50%SOC, and stored in the condition as storage proposal. It needs at least one charge & discharge cycle every six months.
The batteries are supplied with a LiFePO4 Battery Management System (BMS) that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
||Over-charge warning for each cell
|Over-charge protection for each cell
|Over-charge release for each cell
|Over-charge release method
||Under the release voltage
||Over-discharge warning for each cell
|Over-discharge protection each cell
|Over-discharge release for each cell
|Over-discharge release method
||Auto cutoff load when short circuit
||Connect the positive and negative of this battery pack through a lead with 0.1Ω resistance.
||Charge over current warning
|Charge over current protection
|Charge over current release
||Discharge or auto release after 1min
|Discharge over current warning
|Discharge over current protection
|Discharge over current release
||Charge or auto release after 1min
|Short circuit protection
||Charge over temperature protection
|Charge under temperature protection
|Discharge over temperature protection
|Discharge under temperature protection
Cycle life curve of LiFePO4 battery pack 48V 100Ah, telecommunication battery:
Lithium Battery Cylindrical Cell 18650, 26650, 32650, 32700 Manufaturing- Work Shop:
HKE Battery Provides:
Lithium battery cell manufacturing, with different capacity.
Cylindrical Li ion battery cell (18650/ 26650/ 32650,38120, 14500) manufacturing.
Battery management system (BMS/PCM) design, production is done in-house.
Plastic tooling, injection is done in-house.
Battery packing is done in-house.