25.6V 100Ah Deep Cycle LiFePO4 Battery , Solar System Storage Battery 24V 100Ah
25.6V 100Ah Battery Pack, using 32650 LiFeOP4 Battery cells 8S17P assembled to 25.6V 100Ah. Widely used for Solar Energy storage, UPS Back up.
1.Features of 25.6V 100Ah Deep Cycle LiFePO4 Battery:
1. Environmental friendly
2. Lighter weight smaller size
3.Most safe no explosion no fire
2.Specification of Solar System Storage Battery 24V 100Ah:
||Solar System Storage Battery 24V 100Ah
||LiFePO4 32650 3.2V 6000mAh
||0 ℃- 65℃
|Working Voltage Range
|Over-charge Cut off Voltage
|Over Discharge Cut off Voltage
3. Test Conditions
3.1 Standard Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.2 Unless otherwise specified, the tested product is required unused within two month after outgoing.
4. Product Performance
||50% battery SOC state frequency of 1 KHZ ac resistance tester
||Discharge with the current of 0.33C until it can’t discharge, and then rest it for 1h. Charge the battery following CC (0.33C)/CV (14.6V) mode to full capacity, and then rest it for 1h. Repeat above process until full charged capacity is no more than 80% of normal value. Accumulated times is defined as cycle life.
||At 25±5℃ discharge the battery with the current of 0.33C to the cut-off voltage and record charge capacity. Store the battery at various temperatures for 2h and discharge the battery with 0.33C to the cut-off voltage.
||Charge Retention ability
|Charge the battery to full capacity and store it for 28days, and then discharge it with 0.33C to the cut-off voltage.
||Though, user can read the battery system information such as voltage, current, SOC, temperature…and so on.
5. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System (BMS) that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
||Over-charge protection for each cell
|Over-charge release for each cell
|Over-charge release method
||Under the release voltage
||Over-discharge protection for each cell
|Over-discharge release for each cell
|Over-discharge release method
||Charge to recovery
||Discharge over current protection
|Protection delay time
|Over current release method
||Delay about 8S after recovery
||Do not short-circuit the electrodes
||Designed For 500A～750A /500us
||Charge over temperature
|Discharge over temperature
|Charge low temperature protection
|MOSFET over temperature protection
6.Solar Street Light and Solar Energy Storage System
4.HKE Provides Battery Packs for:
> Wind-Solar Energy Storage system > Solar street lights > Off-grid energy storage
> Household energy storage > Telecom backup system > Mobile base stations
> Emergency backup energy sources > Uninterruptible power system > Grid load shifters
> Electric Golf Car > Electric vehicles > Electric motorcycles
> Electric forklifts > Electric boats, etc...
Lithium Battery Cylindrical Cell 18650, 26650, 32650, 32700 Manufaturing- Work Shop:
HKE Battery Provides:
Lithium battery cell manufacturing, with different capacity.
Cylindrical Li ion battery cell (18650/ 26650/ 32650,38120, 14500) manufacturing.
Battery management system (BMS/PCM) design, production is done in-house.
Plastic tooling, injection is done in-house.
Battery packing is done in-house.