Deep cycle 25.6V 60Ah Lithium lifepo4 battery pack for energy storage system:
- Using the technology of lithium iron phosphate cell, superior safety, thousands of cycles, 100%DOD, under normal conditions.
Built-in automatic protection for over-charge, over discharge, over current and over temperature.
- Free of maintenance .
- Internal cell balancing.
- Lighter weight: About 40% ~50% of the weight of a comparable lead acid battery.
- Can be charged using most standard lead-acid charges (set).
- Wider temperature range:-20°C~60°C.
- Support for Series application expansion (up to 51.2V) and two in parallel.
Technical information for Deep cycle 25.6V 60Ah Lithium lifepo4 battery pack for energy storage system:
||Deep cycle 25.6V 60Ah Lithium lifepo4 battery pack
||End of Charge Voltage
||End discharge Voltage
||Max continuous charge current
||Maximum Peak Discharging Current
||Over-discharge Voltage Protection cell
||Over-Current Discharge Protection
||Short circuit protection
With protection built in
||can be customized
||Operation Temperature Range
||Charge 0~45 C, Discharge -20~60 C
Note: If above specification can't satisfy you, please contact us for your detailed requirement.
We could make customized Deep cycle 25.6V 60Ah Lithium lifepo4 battery pack based on your size, continuous discharge current, peak discharge current, battery pack housing, etc..
Applications for Deep cycle Lithium lifepo4 battery pack:
· Energy Storage Systems (ESS)
· Hybrid Grid back-up
· Remote area power systems
· Communications systems
· Electric vehicles
· Marine environments
· Military & Aviation
· Industrial Machinery
· Uninterruptible Power Supplies
· CCTV & Data Transfer
Deep cycle 25.6V 60Ah Lithium lifepo4 battery pack Storage & Transportation:
- Based on the character of cell, proper environment for transportation of LiFePO4 battery pack need to be created to protect the battery.
- Battery should be stayed in the ware house -20℃～35℃ where it’s dry, clean, shade, and well-ventilated.
- The battery should be stored in 50% SOC during transportation.
- The battery need to be charged every 6 months if out of use.
- Keep the battery against dropping, turning over and serious stacking during loading.
Lithium Battery Cylindrical Cell 18650, 26650, 32650, 32700 Manufaturing- Work Shop:
HKE Battery Provides:
Lithium battery cell manufacturing, with different capacity.
Cylindrical Li ion battery cell (18650/ 26650/ 32650,38120, 14500) manufacturing.
Battery management system (BMS/PCM) design, production is done in-house.
Plastic tooling, injection is done in-house.
Battery packing is done in-house.