Deep Cycle Life 3.2V 26650 12V 10Ah 20Ah 30Ah 40Ah 50Ah Lifepo4 Battery Packs With BMS
Lithium battery cell manufacturing
Cylindrical Li ion battery cell manufacturing, model: 18650, 26650, 14500, 38120, etc..
Battery management system (BMS/PCM) design, production is done in-house
Plastic tooling, injection is done in-house
Battery packing is done in-house
Advantage of LiFePO4 battery, comparing to Lead acid battery:
Longer Cycle Life: Offers up to 20 times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership.
Lighter Weight: About 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries.
Higher Power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity.
Wider Temperature Range: -20 C~60 C.
Superior Safety: Lithium Iron Phosphate chemistry eliminates
the risk of explosion or combustion due to high impact, overcharging or short circuit situation.
Increased Flexibility: Modular design enables deployment of up to four batteries in series and up to ten batteries in parallel.
||LiFe PO4 battery 12V3200mAh
||LiFe PO4 battery 12V10Ah
||LiFe PO4 battery 3.2V20Ah
||Lithium iron phosphate battery pack
|Max charge voltage
|Cut-off discharge voltage
|Max charge/discharge current
||DC.2.5x5.5 or selected plug
||Cigerate or selected plug
||wire leads or selected plug
|Battery cell Brand
||Chinese Brand cell
||Over charge&discharge, over current, short circuit
||standard charge&discharge capacity ≥80% C5mAh ,cycle life ≥1000
||Lighting, Garden sprayer, outdoor instrument, door control, Solar LED,12v lead acid battery replacement.
Lithium Battery Cylindrical Cell 18650, 26650, 32650, 32700 Manufaturing- Work Shop:
HKE Battery 26650 battery cell storage:
HKE Battery Provides:
Lithium battery cell manufacturing, with different capacity.
Cylindrical Li ion battery cell (18650/ 26650/ 32650,38120, 14500) manufacturing.
Battery management system (BMS/PCM) design, production is done in-house.
Plastic tooling, injection is done in-house.
Battery packing is done in-house.