Soft Pack Pouch Size Prismatic LiFePO4 Battery Cell 3.2V 50Ah
3.2V 50Ah soft pouch size prismatic cell, light weight, compact size, widely use for EV, AGV, solar energy, UPS, E-bus, long cycle life 8000 times.
Advantage of LiFePO4 battery, comparing to Lead acid battery:
1) LiFePO4 prismatic battery cell with high capacity, light weight, high consistency, high security.
2) Small rechargeable battery cell 3.2V with long cycle life > 4000 times.
3) No memory effect, environmental friendly
5) High gravimetric specific energy, high volumetric specific energy, good deep discharge capacity.
6) Lithium iron phosphate battery cell can be customized. Cells can be combined in series to increase voltage and parallel to increase capacity.
Specification of LiFePO4 Battery 3.2V 50Ah:
||Soft Pack Pouch Size Prismatic LiFePO4 Battery Cell 3.2V 50Ah
||End of Charge Voltage
||Over-Charge Voltage Protection cell
||Max continuous charge current
||Maximum Continuous Discharging Current
||Over-discharge Voltage Protection cell
||Over-Current Discharge Protection
||Short circuit protection
||Can be attached with BMS
||Operation Temperature Range
||Charge -5~55 C, Discharge -10~60 C
Long Life Cycle 3.2V 50Ah Battery for:
Electric Propelling Applications
♦ Engine Starting Battery
♦ Commercial Bus and Transit:
E-car, E-bus, Golf trolley/car, E-bike, Scooter, RV, AGV, Marine, Tourist car, Caravan, Wheel chair,
E-truck, E-sweeper, Floor cleaner, E-walker etc.
♦ Intellectual Robots
♦ Power tools: electric drills, toys
♦ Solar-Wind Power System
♦ City Grid (On/Off)
Back-up System and UPS
♦ Telecom Base, CATV system, Computer Server Center, Medical Instrument, Military Equipment
♦ Security and Electronics, Mobile POS, Mining Light / Torch / LED Light / Emergency Light
Lithium Battery Cylindrical Cell 18650, 26650, 32650, 32700 Manufaturing- Work Shop:
HKE Battery Provides:
Lithium battery cell manufacturing, with different capacity.
Cylindrical Li ion battery cell (18650/ 26650/ 32650,38120, 14500) manufacturing.
Battery management system (BMS/PCM) design, production is done in-house.
Plastic tooling, injection is done in-house.
Battery packing is done in-house.